Home Sauna Specs

Sauna permits in Seattle, WA

By {{AUTHOR_NAME}} · Last updated · First published · Editorial policy

In Seattle, wiring a hard-wired sauna heater needs an electrical permit from SDCI, because a permit is required any time wiring is installed, altered, extended, or connected to electrical equipment. You can pull the permit yourself only if you own and live in the home and do the work yourself; otherwise a licensed electrical contractor pulls it. A backyard sauna building is a separate question: Seattle's no-permit shed exemption is limited to storage and similar “generally unoccupied” uses, so confirm with SDCI before building.

Have a licensed electrician (or, where allowed, you as the owner-occupant under your own permit) do the heater circuit, and follow the heater’s installation manual. This guide summarizes Seattle Department of Construction and Inspections (SDCI) pages; it is not legal advice.

Electrical permit for the heater circuit

  • You need an electrical permit any time electrical wiring is installed, altered, extended, or connected to any electrical equipment. [1]
  • SDCI's FAQ says a permit is needed for all electrical work with a few exceptions; Seattle Electrical Code 80.50(B) lists the few items that can be replaced without a permit (examples given: dimmers, thermostats, water heater, baseboard heater). A new sauna circuit is not on that example list. [2]
  • There are two permit types: over-the-counter (self-issued) for smaller projects such as a single-family home or electrical renovations under 5,000 square feet, and plan review for larger projects. Seattle Electrical Code Article 80, Sections 80.50 and 80.51, determine whether plan review is needed. [2]

Who can do the electrical work

  • Property owners may do their own work when they own and occupy the property they're working on. [1]
  • A homeowner can apply for a permit if they perform the work themselves; if not, they must hire an electrical contractor. A contractor can be added to a homeowner permit later by contacting SDCI. [2]
  • Professionals applying for electrical permits must have a Washington State electrical contractor's license and a Seattle business license. [1]

Does a backyard sauna building need a permit?

  • Seattle exempts a shed from permits only if all of these are true: roof footprint 120 sq ft or less; single story; on a simple slab, pier blocks, or soil; detached; not in or near an environmentally critical area (ECA); and used only for storage, growing plants, or similar generally unoccupied uses. A sauna is used by people, so do not assume the exemption applies; ask SDCI. [3]
  • Sheds that don't meet those criteria need a permit, most only a subject-to-field-inspection permit. A construction addition/alteration permit is needed if the structure is in or near an ECA, larger than 750 sq ft, or has beams spanning more than 14 feet. [3]
  • Whether or not a permit is needed, the structure must meet all code requirements, including building, land use, stormwater, grading, and environmental rules. Electrical service changes or new services are arranged with Seattle City Light. [3]

Inspections

  • Cover inspection: before any electrical work is covered (in a wall, ceiling, ditch, or concrete), it must pass a cover inspection. Final inspection: when the project is complete. A feeder inspection applies if you add a subpanel. [2]
  • Schedule inspections in the Seattle Services Portal. Inspections go on the next day with availability, which may be several days out. You can't book a specific time, but you can get a two-hour window by calling your inspector between 7:00 and 8:00 a.m. on inspection day at (206) 684-8950. [2]

Fees

  • Fees depend on what you are installing or altering, and all fees carry an additional technology fee. SDCI points to its Fee Subtitle for details. [1]

Electrical code: 2023 Seattle Electrical Code (quick reference linked from SDCI's electrical permit page).

Questions to ask Seattle Department of Construction and Inspections (SDCI)

Our sources don’t settle these. Ask before you build:

  • Does SDCI treat a detached backyard sauna under 120 sq ft as needing a building permit? (The shed page limits the exemption to generally unoccupied uses.)
  • Will the inspector require 125% continuous-load sizing for the heater circuit, or accept the manufacturer's breaker size?
  • Does the sauna's location (outdoors, near a shower or pool) trigger GFCI requirements that conflict with the heater manual?

Before you call an electrician

Know your heater’s kW and the manufacturer’s breaker and wire spec. Our calculator estimates amps, breaker, and wire, and the heater spec table lists what the manuals say.

Frequently asked questions

Do I need a permit to wire a sauna heater in Seattle?

You need an electrical permit any time electrical wiring is installed, altered, extended, or connected to any electrical equipment.

Can I do the sauna wiring myself in Seattle?

Property owners may do their own work when they own and occupy the property they're working on. A homeowner can apply for a permit if they perform the work themselves; if not, they must hire an electrical contractor. A contractor can be added to a homeowner permit later by contacting SDCI. Professionals applying for electrical permits must have a Washington State electrical contractor's license and a Seattle business license.

Sources

Page last updated:

  1. Electrical Permit, Seattle Department of Construction and Inspections (accessed November 18, 2026)
  2. Electrical Permits & Inspections — Frequently Asked Questions (PDF), Seattle Department of Construction and Inspections (accessed November 18, 2026)
  3. Sheds, Seattle Department of Construction and Inspections (accessed November 18, 2026)